If you’re unlucky enough to have cracked your iPhone 7 Plus screen, you’ll know just how frustrating it can be. Not only is it unsightly, but it can also make using your phone a real pain.
The good news is that it’s relatively easy to replace an iPhone 7 Plus screen, as long as you have the right tools and know-how. In this article, we’ll walk you through the entire process step-by-step so that you can get your phone back in working order in no time. Let’s get started!
Gather the necessary tools, including a small Phillips screwdriver, a suction cup, and a pentalobe screwdriver
Before beginning any repairs on your iPhone, it is important to make sure that you have the necessary tools. A small Phillips screwdriver, a suction cup, and a pentalobe screwdriver can be invaluable when undertaking even the simplest repairs. The small size of some of these tools can make them difficult to locate, but with careful searching and patience, it is possible to find these items in hardware stores or online retailers.
Remove the two screws from the bottom of the iPhone using the small Phillips screwdriver
Removing the two screws from the bottom of an iPhone is a relatively simple and quick process that can help give access to certain parts of your phone. To do so, you will need to gather a few tools – notably a small Phillips screwdriver. Find the two screws located on the bottom of your device and grasp them tightly with your screwdriver. Turn in a counter-clockwise direction for a few rotations until both screws are completely removed. With some gentle tugging, you should be able to remove these screws and continue with whatever project you have in mind.
Use the suction cup to remove the screen from the body of the phone
Using a suction cup to remove the screen from a phone can be a daunting task, but it is doable. With a few simple steps and the right tools, anyone can handle this repair with ease. Firstly, turning off the device and pulling out any chargers or accessories connected is essential for safety. Gently placing the suction cup on top of the cracked screen to create a tight seal is key for better removal results. With some pressure applied, users can slowly pull back on the suction cup, thus forcing air in between the glass and body and separating them from one another – all without causing further damage. Following these steps will result in successfully removing the broken screen’s glass with no hassle or worries!
Unscrew the five screws holding down the metal plate covering the LCD connector
iPhone owners beware – unscrewing the metal plate covering the LCD connector can be a tricky task. Without the proper tools and experience, iPhone users risk damaging their device if too much pressure or improper force is applied to the screws. Start by locating all five screws and then carefully remove them one at a time to avoid putting stress on other components in the iPhone. Doing so will ensure that your iPhone remains safe while gaining access to the LCD connector.
Detach the LCD connector by gently pulling it up from its socket
Detaching the LCD connector from an iPhone’s socket requires finesse and patience. The process is straightforward but should be done with extreme care so as not to cause any damage to the device’s circuitry. Begin by gently pulling up on the LCD connector with a set of tweezers or plastic spatula until it begins to come loose. Once it is slightly detached, use your fingers to remove the rest of the way carefully. Follow this procedure for a successful detachment, and your iPhone will remain in perfect working order.
Remove any remaining screws and detach all other connectors before taking out old screen
Before taking out the old screen, it is essential to remove any remaining screws and detach all other connectors thoroughly. This crucial step could save you time and frustration since these screws and connectors will be needed when replacing the new screen. Furthermore, properly removing these objects can help prevent damage to your device’s internal components. Make sure to take your time during the process to ensure that the job is completed correctly.
Conclusion
With a few household tools, you can remove an old screen and replace it with a new one in under an hour. Be sure to take your time completing each step, especially when removing the LCD connector and other delicate parts. Have you ever replaced an iPhone screen? How did it go? Let us know in the comments below!
