Terminl

+1 450 255 0135

How To Fix Oculus Quest 2 Controller Drift Fast & Easy

Oculus Quest 2 controller drift is an issue that affects Oculus players who have used their controllers for long periods of time. This problem causes the player to slowly move in-game even when no input has been given to the controller, resulting in a frustrating experience. Fortunately, there are some steps you can take to prevent and fix Oculus Quest 2 controller drift quickly and easily. By following these instructions, you will be able to enjoy your Oculus gaming sessions without any interference from drifting controllers.

What You Need – List necessary tools and parts

In order to fix Oculus Quest 2 controller drift, you will need a few tools and parts. First and foremost, you will need an electrical contact cleaner or isopropyl alcohol in order to clean the inside of the Oculus Quest 2 controllers. For this, it is recommended to use 90% or greater isopropyl alcohol. Additionally, you should also acquire a can of compressed air as well to blow out any dust that might have accumulated inside the controller’s interior.

Next, for tools, you will need either a flathead screwdriver or an iFixit opening tool in order to remove the black plastic faceplate from the Oculus Quest 2 controller without damaging it. Furthermore, a small but strong implement such as a needle-nose pliers or tweezers may also be necessary for disconnecting and reattaching the joystick cap from its housing without damaging it in any way.

With all of these parts and tools at hand, you are now ready to effectively and safely repair Oculus Quest 2 controller drift!

Step 1 – Remove Battery From Controller

The first step in fixing Oculus Quest 2 controller drift is to remove the battery from the controller. To do this, turn off the Oculus Quest 2 headset and remove it from your head. Next, locate the battery compartment on the back of the Oculus Quest 2 controller. Depending on what Oculus version you have, this may be hidden under a black plastic cover or built into the rear section of the controller itself. Unscrew the screws to open up the battery compartment, and carefully disconnect and remove the battery. Take a moment to inspect both sides of your Oculus Quest 2 controller’s joystick for any signs of wear and tear before replacing your battery and continuing with other repairs.

Step 2 – Remove Controller Faceplate

Once the Oculus Quest 2 controller battery has been removed, the next step in fixing Oculus Quest 2 controller drift is to remove the black plastic faceplate from the Oculus Quest 2 controller. To do this, carefully use either a flathead screwdriver or an iFixit opening tool to gently pry apart the faceplate from its surrounding housing. Once apart, it is important to use extreme caution not to accidentally damage any of the internal components within your Oculus Quest 2 controller by using too much pressure when prying open the faceplate.

Once opened, you will have full access to all interior parts of your Oculus Quest 2 controller that may be causing issues due to drift. Be sure to inspect each part of your Oculus Quest 2 controller such as the thumbsticks and internal springs for any signs of wear or tear before continuing with other repairs. If any parts appear worn out or frayed, it may be best to replace them before attempting further repairs on your Oculus Quest 2 controllers. Additionally, if there are any dust particles inside your Oculus Quest 2 controllers, now is a great time to blow these out with a can of compressed air before reassembling your Oculus device again.

Step 3 – Remove Joystick Cap

The third step in fixing Oculus Quest 2 controller drift is to remove the joystick cap from its housing. To do this, carefully use a small implement such as a pair of needle-nose pliers or tweezers to gently lift and unclip the joystick cap from its housing. Be extremely careful not to bend or damage the cap if you are using a pair of needle-nose pliers for this task, as it is made of delicate material and can easily be damaged. Once removed, use a soft cloth or brush to thoroughly clean the interior surface of the Oculus Quest 2 controller’s joystick before proceeding with other repairs. This cleaning is important as dirt and dust particles can accumulate inside the Oculus Quest 2 controller over time causing further drift issues down the line. Additionally, keep an eye out for any signs of wear or tear on both sides of the Oculus Quest 2 controller’s joystick as well as on its internal springs before replacing your joystick cap again.

Step 4 – Clean Controller Joystick

In Step 4 of fixing Oculus Quest 2 controller drift, you will need to thoroughly clean the joystick and internal components of your Oculus Quest 2 controller. If you notice any issues with either side of your Oculus Quest 2 controller’s joystick, it may be best to replace it before attempting further repairs on your Oculus device. Once cleaned and inspected, we can get ready to securely put back together both halves of your Oculus Quest 2 faceplate and reattach your Oculus Quest 2 joystick cap into its housing.

Step 5 – Reattach the Thumbstick

In Step 5 of fixing Oculus Quest 2 controller drift, you will need to reattach the Oculus Quest 2 controller’s thumbstick. To do this, first use a small implement such as a pair of needle-nose pliers or tweezers to gently lift and unclip the Oculus Quest 2 controller’s thumbstick from its housing. Once everything looks clean and safe and all components are in place, you can now securely put back together the Oculus Quest 2 faceplate and reattach your Oculus Quest 2 thumbstick into its housing while being sure not to over tighten it too much in order to avoid any damages. Finally, replace all screws inside the compartment again before closing up the Oculus Quest 2 controller’s battery compartment and reconnecting all cables inside. Once all these steps have been completed successfully, you should now find that your Oculus Quest 2 controllers no longer drift around when in use!

Conclusions – Recap what was discussed in the post, including Oculus Quest as a keyword

In conclusion, Oculus Quest 2 controller drift can easily be fixed by following a few simple steps. Firstly, it is important to ensure that the Oculus Quest 2 joystick cap is securely attached and not over tightened in order to avoid any damages. Secondly, both sides of the Oculus Quest 2 controller’s joystick should be thoroughly cleaned with a soft cloth or brush before being inspected for wear or tear. Thirdly, all internal springs inside your Oculus Quest 2 controller should also be checked and replaced if necessary. Finally, once everything looks clean and safe and all components are in place; you can now reattach your Oculus Quest 2 thumbstick into its housing while being sure not to over tighten it too much in order to avoid any damages. We hope this article has been helpful in helping you understand how to fix Oculus Quest 2 Controller Drift fast & easy!

Like this article?

Share on Facebook
Share on Twitter
Share on Linkdin
Share on Pinterest

Leave a comment